Hardware
We have put up some pictures and descriptions of what people are using to run and develop PBX in a Flash. Click on one of the names at the side to have a look.
Office Production System
Submitted by Admin on March 15, 2008 - 8:18pm.| CPU: Pentium 4 630 Prescott 3.0ghz
|
Motherboard: Gigabyte GA-8I945GZME-RH
|
| Memory: 1024 MB of DDR2 Corsair RAM
|
Hard Drive: Western Digital 80 GB
|
|
POTS Interface Card
|
Case-Power Supply Custom 19" 4 U rack mount case with 450 watt power supply. Click on the picture I highly recommend the company I bought it from! I bought 2 cases from them and they were both shipped immediately. I upgraded my main server with one of these cases and it has been running flawlessly (and much cooler).
|
| Grandstream GXP2000
|
UTStarcom F1000G 802.11 b/g wireless SIP Phone
|
Test Hardware
Submitted by Admin on March 14, 2008 - 12:42pm.| CPU: P4 2.8 ghz
|
Motherboard: Intel D845EPT2
|
| Memory: 1 GB of RAM
|
Hard Drive: Western Digital 160 GB
|
|
POTS Interface Card TDM400P with 2 FXO Ports This card allows me to interface 2 POTS lines into the PBX system. I am considering adding an FXS line which would allow me to plug in regular analog phones into the system.
|
Case-Power Supply Custom 19" 4 U rack mount case with 450 watt power supply. I highly recommend the company I bought it from!
|
PBX in a Flash Development and ISO Build Machine
Submitted by Admin on March 12, 2008 - 12:47pm.|
APEVIA X-QPACK-NW-BK/420 Black Aluminum
|
GIGABYTE GA-945GZM-S2 LGA 775 Intel 945GZ
|
|
Western Digital Caviar SE WD1600AAJB 160GB
|
Intel Core 2 Duo E4400 Allendale
|
SVN Server
Submitted by Admin on March 11, 2008 - 12:49pm.| Sun Enterprise 250 Running Solaris 10 This venerable workhorse is maxed out on hardware. Has 2 - 400 Mhz Ultra Sparc II Cpu's with 2gb of ram and 6 - 73 gb 10,000 rpm SCSI drives. Also onboard it a 100mb zip drive, a 320gb tape drive, and dual redundant power supplies. It is plugged into an APC 3200 watt UPS. I chose this as the svn server as it is a workhorse and barely used. |
|
Mini ITX - Compact Flash Based PBX system
Submitted by Admin on March 10, 2008 - 12:53pm.| Everex TC2502 - with bios updates
|
The system came with this motherboard which uses a C-7 low power CPU
|
| 1 GB RAM
|
Digium TDM400 Card (Thanks to Digium for the donation)
|
| SYBA SY-IDE2MC-4B IDE to CF/MMC/MS/SD Adapter Replaced hard drive with a compact flash to ide adapter from Newegg Model
|
Compact Flash Replaced Hard Drive with compact flash card
|
All in all a very stable system for the SOHO pbx world. Future tweaks will move the guts to a non pc looking wall mountable case. The power supply will be replace with a svelte 90 watt brick type. The whole thing sans the custom case and TDM card works out to about 185$

PBX In A Flash Scripts